CBI  
 
English Spanish Swedish Portuguese German French Dutch
 
 
About UsOur EquipmentApplicationsEnd ProductsParts and ServiceNews and EventsFind a DealerContact Us
 
 

What's New


CBI's new integrated, high-capacity chipping and flailing system is designed specifically for logging contractors who want to maximize throughput, minimize downtime, increase production, and lower operating costs.

The Magnum Force Flail 604 is a 4-roll flail design that has been engineered for the highest volume debarking while reducing fiber loss, chain wear, and fuel consumption. A completely-enclosed system with no exposed drive components provides for substantial containment of debris while drastically reducing maintenance and fire hazards. Full width, large diameter feed rolls ensure continuous positive feed and provide the highest throughput available…150+ tons per hour. An extra-long, hydraulic debris removal push ram is heavily supported by framework to ensure proper alignment and extend the life of the hydraulic cylinders. The large capacity, field-proven Tigercat loader allows more wood per grapple and remotely controls both the chipper and flail from the cab.

The Magnum Force DC 754 utilizes a 4-knife, 75" chipper disc, has a large 26" feed opening, and is designed to move the flail in the field. The chip discharge chute is remote operated, camera monitored, and folds hydraulically for transport. To reduce landing costs, the trash separator and bark pusher both discharge on the opposite side of the chip discharge, allowing a trailer to park parallel with the chip system while being loaded. The bark discharge system is designed to eliminate carryover, enabling the highest quality chips at unprecedented production levels. Chip sizes from 3/8 inch to 1 inch are available.

Each heavy-duty unit was built to be legally transportable and then designed to work together as one in the field. CBI has raised the bar significantly and brought in-woods chipping to a whole new level!CBI's new integrated, high capacity chipping system is designed specifically for logging contractors who want to maximize throughput, minimize downtime, increase production, and lower operating costs.

Brochure - click here

Video Clip
- click here

Video Clip from DEMO 2012 - Click here

Video Clip from DEMO 2012 - Click here



The CBI Magnum Force Track Mounted Flail is engineered to be the industry’s most rugged and productive delimber/debarker. The development of this flail was dictated by the market and is based on the needs of logging contractors and particularly those operating in the Southern Hemisphere who work with Eucalyptus and other species with “stringy” bark. This debarker is an ideal complement to our 2-pocket and 4-pocket chippers used for the production of boiler fuel, traditional pulverized fuel and feed stock for pellet fuel manufacturing. With this design, material is fed into and out of the flail chamber by pivoting top feed roll assemblies with position sensing cylinders to ensure a controlled feed. Top Feed Rolls are driven by Poclain High Torque Wheel Motors.

CBI’s three-flail design provides optimum contact with wood to deliver maximum debarking action. It consists of two 50” swing diameter (1.27 m) top flail drums X 48” wide (1.21 m) with 11-link chains and one 40” swing diameter (1 m) bottom flail drum with 8-link chains. The top flail positions are determined by the top feed roll cylinder positioning sensors and the flail RPMs are automatically adjusted based on log diameters. Flail drums are driven by Rexroth hydrostatic pumps and direct coupled motors with variable speed from 0-700 RPMs.

The bottom feed rolls are driven by direct-coupled Char-Lynn Motors through a Brevini Gearbox. The inside of the flail chamber has replaceable wear liners for easy maintenance and overall longevity of this machine. Residue is discharged from the flail chamber by a large hydraulically-actuated push ram that utilizes a 5 1/2” bore, 90-inch stroke cylinder. The Magnum Force Flail Debarker also features a closed-loop hydraulic system with a 95-gallon (361 L) reservoir. The B-5 undercarriage features two-speed, heavy-duty drive motors and Bonfiglioli Planetary Gear Drives. Also, a folding maintenance platform on the non-drive side allows for easy maintenance. The 540 hp Caterpillar C-15 electronic diesel engine is equipped with a heavy-duty radiator and a hydraulically-actuated, reversing Flexxaire fan. Finally, the Magnum Force Flail Debarker weighs approximately 73,000 lbs. (33,121 kg) with a 250-Gallon (950 L) fuel tank. It is completely controlled by radio remote.


Brochure - click here


 
Introducing the CBI Truck-Mounted (2 Flail)! When material is fed into the flail chamber by pivoting top feed roll assembly with position sensing cylinders to ensure a controlled feed. The top feed roll is driven by a Poclain high torque wheel motor and a chain infeed conveyor (48" wide by 6'-9' long). The infeed and sides hydraulically fold for transport. The 2 flail design consists of one 40" swing diameter top flail drum by 48" wide with 8-link chains and one 40" swing diameter bottom flail drum wih 8-link chains for optimum contact with the wood to insure maximum debarking action. The top flail positions are determined by the top feed roll cylinder positioning sensors and flail RPM's are automatically adjusted based on log diameters. The flail drums are driven by Rexroth motors direct coupled to flail shafts designed for 0-700 RPM's. The 2 Flail also features replaceable wear liners inside the flail chamber.

Video - Click here

                                                            

Introducing the Shingle Pro XL 406. Designed for single-pass processing to a finished end product, the Shingle Pro is bigger, stronger, more reliable, and more productive than anything made for this application. It offers the highest throughput and the lowest cost per ton of any shingle grinding system available. It comes with a powerful CAT C27, 1050 hp electric start engine; a unique hog box design, which allows the upper hog box and bonnet assembly to hydraulically lift to expose the rotor and grates for safer and easier maintenance; a heavy-duty reinforced housing with replaceable wear liners; a rugged forged rotor with heavy-duty hammers and tips that are easy and cost effective to maintain; an integrated water spray system designed to control dust more efficiently in the grinding chamber (also doubles as a color injection system for mulch processing); a completely enclosed discharge conveyor for added dust control; and a unique engine cooling system that prevents radiator clogging. The optional CBI Magnum Overband Magnet features an extra strong permanent magnet enclosed in a special stainless steel frame, which allows for the most effective removal of metal and maximum performance. CBI’s new Magnum Force Shingle Pro XL 406 is the clear choice for recycling asphalt shingles or for high-volume material regrinding.

Brochureclick here

Video Clip
click here



  

The CBI Magnum Force 5400 is the latest offering in the new generation of grinders, where owners can select from five different field-swappable rotors to accommodate changing materials and processing demands. This unique design provides the flexibility to process an exceptionally wide variety of materials and generate the products that your clients demand -- all with a single machine.

Brochure
click here
Video Clip  - click here


  


 

  

CBI MDS
Only Available in limited markets.

The CBI Metal Detection System™  is setting a completely new industry standard. Carefully placed impact measuring sensors detect if a rotor tooth strikes tramp metal. Within milliseconds the sensor quickly communicates with the machine’s main control system, telling it that metal has been detected. The controller immediately reverses the feed system and throttles down the engine.  Depending on the severity of the impact (and the option selected for your CBI grinder) the system hydraulically opens the anvil/screen frame assembly at an extremely high rate of speed without even requiring an actual impact against anvil or screen – thereby allowing a safe ejection of the tramp metal and minimizing potential damage. The sensitivity of the system is easily adjustable by the operator on the machine control panel.

 
Screw It!
 
Brush Transport System
 

Customer Login
 
Sales Dealer Login