 |
|
|
 |
|
|
 |
       
|
|
|
||
|
||
      |
CBI MAGNUM FORCE SERIES 9000 HZ HOG
(Formerly 6000)
Built for Those That Believe Bigger is Better
The CBI Magnum Force Series 9000 HZ Hog is used for C&D, Yard Waste, Biofuel, Mulch, Sawmills and Land Clearing.
The ultimate champion of horizontal grinders offers 100% continuous positive feed. It is built to process large amounts of full-length logs, brush, stumps, telephone poles, railroad ties, etc. using a 60-inch diameter, 25,000 lb. solid steel rotor. The 6000 Magnum has replaceable tips that last approximately 500 hours, saving on maintenance costs. It has low fuel consumption and like all CBI equipment, is safe to operate with no flying debris. The Magnum 9000 can process up to 150 TPH and the end product can easily be changed to meet your specifications.
CBI MAGNUM FORCE SERIES 9000 HORIZONTAL HOG
HOG:
- Heavy-duty reinforced housing with bolt-in replaceable wear lines
- 60" diameter x 60" long solid steel offset helix rotor with 4 rows of bolt-on tungsten imbedded strikers
- 7" diameter shaft and bearings
- Heavy-duty swing-away grate frame with grate liner and cutting anvil held in place with shear pin for rotor protection
- Weight of hog with rotor, shaft, bearings and grate, 60,000 lbs. (approx.)
INFEED SYSTEM:
- 18' x 60" Feed Conveyor with high sides; impact bars in bottom; 18" head and tail pulleys; 440, 4-ply belt; hydraulic drive through gearbox
- 50" diameter upper feed roller with a 4" diameter shaft, bearings, two high torque planetary gear drives with 2000 series Char Lynn motors and hydraulic up and down pressure
- 18" diameter bottom feed roller; 3" diameter shaft, bearings, and, high torque planetary gear drive with 2000 series Char Lynn motor. ENGINE: ... Caterpillar 3412 Electronic Diesel Engine rated, 1000 HP at 2250 RPM
- Twin Disc model 318 extra heavy-duty PTO clutch with outboard support bearing
- Caterpillar Air Filtering System with Enginaire Pre-Cleaners
- 8" Critical Muffler
- Electric dual battery 24 volt DC system with emergency shut down, and all weather control enclosures
FLEXXAIRE FAN:
- Reversing pitch radiator fan that, during operation reverses air flow automatically every 5 minutes to keep radiator clean, thus, eliminating costly shut-down
DISCHARGE CONVEYOR:
- 50' x 60", 20 degree troughing idler conveyor; 16" head pulley, lagged with 2 15/16 diameter shaft and bearings; 18" wing tail pulley with 2 15/16 diameter shaft and bearings; 5" diameter idlers; 330, 3-ply heavy-duty belt; hydraulically folds for transport; direct coupled series 6000 Char Lynn 24 HP hydraulic drive; 16' discharge height
TRAILER FRAME:
- Specially made wide flange structure with Hutchens H9700 tri-axle suspension with 10'-6" spread; six super single Alcoa aluminum wheels with Michelin, 425-65R 22.5 tires and two Milwaukee front stabilizers with 5" bore cylinders, 14,000 lb. lifting capacity capable of picking up tractor if necessary
FUEL TANK: 460 gallon
HYDRAULIC SYSTEM:
- Complete with 80 gallon tank, load sensing and gear pumps, valves, oil cooler, all neatly plumbed using steel tubing and hoses
ELECTRIC:
- Radio remote control to run all functions with full mechanical backup; Four (4) emergency stops placed around machine; Caterpillar engine RPM sensor that regulates feed system
PAINT:
- All appropriate surfaces (except for wear and machined surfaces) are sand blasted to S.S.P.C. SP 6-10 commercial to white finish; one coat of epoxy primer and one coat of CBI yellow high gloss Dupont polyurethane enamel paint, total 5 mils. Equipment is assembled using zinc plated hardware.
DIMENSIONS:
- Length: 55'-6" in travel position
- Height: 13'-4" -travel; 16' operational
- Width: 11'-4"
- Weight: 110,000 lbs.
OPTION: MAGNETIC HEAD PULLEY w/ Aluminum Diverter Chute
|
CONTINENTAL
BIOMASS INDUSTRIES, INC. 603-382-0556 PRODUCTS | APPLICATIONS | HOME | WHAT'S NEW | COMPANY | CONTACT US
 |
 |